Titan Capspray 115 HVLP Fine Finish Sprayer

Titan Capspray 115 HVLP Fine Finish Sprayer
Click over image to enlarge
Price: $2,195.00
Sale Price: $1,675.00
You Save: $520.00
 
Weight: 26.00 lbs
More images
Purchase
Quantity :
 
Overview
Titan Capspray 115 HVLP Fine Finish Sprayer
This revolutionary, 6-stage portable turbine spraying system is the only turbine ever to achieve full HVLP capability. It combines quiet operation and high air cap pressure for the finest atomization possible. CAPSPRAY 115 will apply nearly all fine finish coatings with little to no reduction.

Features



Delivers the most power atomization in the industry
Wider fan patterns with speed and control to finish surfaces cleanly and perfectly the first time
Dual air filtration with an automotive type air filter with a pre filter on the atomizing side
Tool box for needles, nozzles, check valve and nozzle wrench
Built in cup and gun holder
Dirty filter warning light
High and low speed settings for 4-stage performance or 6-stage performance
A wide range of needle and nozzle offerings to apply everything from stains and varnishes to latex and texture finishes
Specifications
Description

REVIEW OF THE The Titan Capspray 115 HVLP SPRAY UNIT by: Mark Fitzgerald ( Fitzgerald Creating Coatings)


Hi Gary, I have been using the Titan Capspray 115 for about 2 years now. Wow, this unit has allowed me to product some of the best finishes that I have sprayed in the past 15 years. I don’t know for sure what makes it so good. But, if I had to guess it would probably be fact that with this much horse power the finishes are being atomized at a much more efficient rate. Which in turn is creating a much smoother finish. What I have found out is I don’t always need to use the 6 stage however, depending on what I am spraying. The 6 stages of this HVLP TURBINE allow me to use less reducer and there for it seems that I end up with a heaver coating without the sages. I would recommend this unit to everyone. I am getting ready to purchase another unit. I told my guy that he wasn’t getting mine and that he would have to wait until his unit was about dead. Guess what??

Mark Fitzgerald


 The Titan Capspray 115  HVLP TURBINE SPRAYER is usually purchased by the most experienced bathtub, tile, and counter top refinishing  professionals. These refinishing experts push their units hard, and by experience know the negative effects associated with using the smaller 2 and three stage units (See EZ-Flow for more on this subject) so we really appreciate the large dual filters located on each side. Like most HVLP Turbine sprayer the motors operate at extremely high RPMS so it's imparative to keep the motor housing clean by changing these filters often. It's also important to place the Turbine unit as far as away from the substrate being sprayed. Other Manufactures of Turbine sprayers such as American Turbine,  Fuji, or the Axis Pro Citation as Titan Capspray 115 Turbine Sprayer ships with the factory 30 Foot air hose. You can add a flexible  whip hose to make up the difference. Additionally many refinishers find the extra 4 foot flexible whip hose a nice option especially for spraying the inside wall of bathtubs where turning the hvlp spray turbine spray gun almost 180 degrees back toward the sprayer while spraying the inside vertical walls of a bathtub. Commerical, Hotel, Multi Family bathtub refinishing professionals who use their spray units in these environments have their units running all day. The inline 3 foot High Heat Hose added will extend your turbine air hose life plus plus protect you from burns while disconnecting the HOT air hose from the actual unit after a few hours of use. The proper use of additional quick disconnects is also advised.

The atomized fine overspray dust generated while spraying  SharkGrip and SharkThane or most refinishing products will travel. Sealing off the room with plastic, and placing  a ventilator in a strategic location will have serveral benefits.

  • Controlling the fumes.
  • Redirect sticky dustry overspray away from your Titan Capspray 115 Turbine Sprayer.
  • Protect the Surrounding areas from overpspray
  • Protect your bathtub tile and counters finish from foreign objects, particles and household contaminates
  • Increases the perception of professionalism

 

 

Titan Capspray 115 HVLP - Air Pressure 11.5 PSI
A Step up in power and performance from the 105, the 6 stage Capspray 115 will handle enamel, multispec coatings, in addition to stains, sealers, light bodied shellacs and lacquer. We recommend this for medium size residential or commercial projects. Ideal for midlevel projects where speed and relaibility is essential. A Great starter unit for the bathtub, tile, and counter top refinishing Industry. If you would  like to speak to me directly and learn how this unit performs in the Bathtub Tile and Counter Top Refinishing industry, please call 210.849.0400 or 210.822.9393
Thank You 
Gary Goel Owner SharkGrip Coatings


FEATURES    SPECIFICATIONS  CONFIGURATIONS PRODUCT INFORMATION




  • Up to 90 percent tranfer efficienties 
AIR PRESSURE 11.5  CAPSPRAY #0524099 Capsray 115 Owners Manual
  • compact & lightweight
TURBINE 6 STAGE -------- Capspray 115 Training Manual
  • built-in cup & gun holder
HOSE 25 FEET  -------- Titan Fine Finish Training Manual
  • tool box for needld. nozzles, check valves seals,& nozzle wrench 
 MAXIMUM II GUN --------- --------
  • dirty filter light warning 
WEIGHT 22 LBS --------- --------
  • dual air filters
         ------------ --------- --------

 

Product Description

This revolutionary, 6-stage portable turbine spraying system is the only turbine ever to achieve full HVLP capability. It combines quiet operation and high air cap pressure for the finest atomization possible. CAPSPRAY 115 will apply nearly all fine finish coatings with little to no reduction. Features Delivers the most power atomization in the industry Wider fan patterns with speed and control to finish surfaces cleanly and perfectly the first time Dual air filtration with an automotive type air filter with a pre filter on the atomizing side Tool box for needles, nozzles, check valve and nozzle wrench Built in cup and gun holder Dirty filter warning light High and low speed settings for 4-stage performance or 6-stage performance A wide range of needle and nozzle offerings to apply everything from stains and varnishes to latex and texture finishes Specifications Air Pressure 11.5 PSI Trubine 6-Stage Tangential Hose Length 30' + 5' Whip Gun Included Maxum Elite Weight 24.0 lbs

Recommended Products
TURBINES
CAPSPRAY 95 HVLP
Product ID : 0524032
Price: $1,150.00
Browse more in Spray Equipment category
Click to view
AT953 3- STAGE American TURBINE HVLP
AT953 3- STAGE American  TURBINE HVLP Product ID : AT-953
Call for price
Browse more in Spray Equipment category
Click to view
The Mini-Mite 3 PLATINUM™ Series
The Mini-Mite 3 PLATINUM™ Series Product ID : 2903-T70
Call for price
Browse more in Spray Equipment category
Click to view
Mini-Mite 4 T-Series™ Model
Mini-Mite 4 T-Series™ Model Product ID : Mini-Mite 4 T-Series™ Model
Call for price
Browse more in Spray Equipment category
Click to view
image